Air Conditioner Repair – How To Fix A Sunk AC Pad

Air conditioner heat exchanger pumps and compressors may sink over time which puts a stress on the coolant lines. While most of us would simply call in for air conditioner service, here are some tips on DIY air conditioner repair.

As said earlier, concrete pads under the AC tend to settle down with time. As long as they don’t interfere with the coolant lines and lets the AC stay dry, it’s OK. However, if you notice that the concrete pad has sunk and is pulling the coolant lines tight, and water accumulates around the unit, you need to get it repaired as soon as possible.

Lift the pad at one end with a board and put some sand underneath it. Do the same to the other end to make the pad level. It is important that you lift the pad slowly and carefully because there are high tendencies for it to crack or break. The good thing about it is that you need not remove or unhook the AC for this process. However, if you happen to break the pad, have an air conditioner service technician repair it for you.

Replacing old AC pad:

If you are considering a replacement for your old AC pad, it is best to go for a plastic one. They are easily available in stores and also online. You can do the replacement yourself, or can call in an AC repair technician to do it for you.

While hiring an AC repair technician, it is important that you choose a service that has enough experience in handling this type of job. Although, replacing an AC pad is not a big job, if done unprofessionally, it can cause a great deal trouble in the future.

Air Conditioner Repair Guide – How To Stop Leaky Ducts

Every house today has heating, ventilating and air conditioning ducts that help us to facilitate a healthier and happy living. However, sometimes, you might experience leaky ducts which may go unnoticed, but you may see a huge energy bill increase. While some take little or no effort to rectify, others may want to call in an air conditioner repair technician to do the job for them.

When cool or heated air escapes from your duct (irrespective of the quantity) the air conditioner has to work longer to patch up the required thermostat temperature. Since this scene happens in the attic or the basement, very few people notice the issue. However, the increased running of the A/C increases the electrical consumption which leads to a higher energy bill.

The only way to overcome this problem is to seal the leaky joints. Sealing leaky joints is extremely effortless and requires no air conditioner service at all. All you need to do is to buy silicone caulk (aluminum-colored) and close each joint in your duct system. Make sure that the joints are cleaned first with the help of a cleaning spray solution. Make sure you seal every branching duct. Once done you need to use a high temperature capability UL181 aluminum foil tape and wrap them around the joint.

Why not use any regular duct tape?

Well, a lot of people will have this question in mind, as regular duct tape is a simple and easy household solution. However, there are reasons why they are not preferred. First off, the regular duct tape is not approved for sealing a duct professionally and it does not last well in the long run. Hence, it is always advisable to go for professional UL181 aluminum foil tape that can not only seal your duct joints really well, but can save you a great deal of cash on your energy bills.  

Air Conditioner Repair Guide – Replacing Rotten Insulation

Yet another common problem as well as an important air conditioner repair is rotten insulation of your AC. It does not matter how well you keep your AC, with time, your insulation will wear down and this calls for an air conditioner repair or replacement. However, air conditioner repair need not always be called in from outside, if you can do it yourself. Fixing this problem is simple and here is how you do it in two simple steps.

STEP 1: it is the condensation on your AC lines that withers the insulation. This also means that your energy bills have been increasing for some time now. Hence, you need to install new insulation now and the first step is to peel off the old one. Once done, you need to measure the diameter of the two tubes. Take the measurement of the larger tube as the skinny one will not need insulation.

STEP 2: Carefully measure the entire length of the AC line and cut the insulation accordingly. Cut a few inches longer, in case you need extra. Now place the foam over the tube or wire and remove the adhesive liner. Carefully press the seam together as you go, as once you have glued them together, it’s difficult to take them apart.

NOTE: Unfortunately, it’s very difficult to find the right insulation for your AC repair at any regular hardware store. That’s why you need to contact a refrigeration supply service or buy them from an online supplier. You may also contact your manufacturer to determine the right kind of insulation needed for your particular brand.

Replacing rotten insulation is now easy than ever but if you do not feel comfortable doing the work yourself, or you do not have the time, you can always call an air conditioner service to do the job for you.

DIY Air Conditioner Repair – Tips To Connect Multiple Evaporator Coils to A Single Unit

A split AC usually does not require additional evaporator coils, as the unit is divided into two parts. The outside piece consists of the condenser and the compressor, while the inside unit contains the evaporator. Since the front part is the main supply duct of your house, additional coils will create more damage to the system than produce cold air. However, you could add evaporator coils at the termination point of the duct.

Here is a simple DIY air conditioner repair method on how you could add an additional evaporator coil:

Since installing additional evaporator coils requires you to open up your room walls, it is advised that you carefully analyze the plan of your house and see which ducts are best for alteration. A split AC has the same duct as that of your heating system, so you will be connecting the coils to the warm air supply system.

You might need to disconnect the pipe at a bend or valve and place the evaporator coil in its position. You may also need to cut down a section of the pipe to ensure proper fitting of the coil. Once you have the coil in place, screw it into position. Make sure you have all the wires outside of the coil.

To connect the coil to the main evaporator coil, you need enough wire to reach the main coil. Once done, you need to find the wire that gives power to the main coil, and the connection that controls the cool air. Once you find this, join the main power supply wire and the new evaporator coil wire so that both coils run from the same source.

After this, you need to give a test run to make sure all is well. Leave the system running for two hours so that you can be sure it is functioning properly. When satisfied, you can wrap some pipe tape around the coil edges and close up the wall.

Although, most people would call in an air conditioner repair service, it’s not needed always. A little effort on your side and some basic tools will help you to do it yourself and avoid costly AC repair.

Arizona Prospecting

If you are considering Arizona prospecting for gold, there are important things that you should know about the area. It is an active area for gold mining for a number of reasons.

There is more than one way you can approach Arizona prospecting. Many people choose to try a prospecting “vacation” or tour before they commit to investing in a claim in the area. There are many companies that offer prospecting tours to the Golden Triangle area or the Vulture Mining District which are some of the most potentially productive areas in Arizona. There are rich mineral deposits in the soil which have not been fully mined over the years.

The Vulture Mountain area is a popular site for Arizona prospecting because it is a mineral-rich area that was very productive in the late nineteenth century all the way up until World War II. The mines were forced to shut down during World War II because all resources needed to be devoted to the war effort. The area was not fully mined and there still remain many precious metals in the dirt.

If you investigate Arizona prospecting and want to mine your own piece of land, you can buy a claim in one of several areas. If you buy a claim, it means you have the rights to all the precious minerals in the land. You will not actually own the land, rocks or soil. It is very different than purchasing a piece of real estate. You will probably prefer to purchase a claim that is offered by a company that has already staked the claim. They will have filed the paperwork and done the surveying necessary to stake the claim. This will dramatically simplify the process for you. You will have to pay for the claim and you will also have to pay state taxes on the land as well as a yearly maintenance fee.

 

The Ins and Outs of Buying Gold Mining Claims

DIY Air Conditioner Repair – Why Is It Important To Clean AC Ducts?

It goes without saying that one of the most important DIY air conditioner repair jobs is cleaning the AC ducts from time to time. Although, air conditioner ducts are hidden from view, they play a significant role in supplying fresh air to your home and removing pollutants from the air.

Reasons Behind AC Duct Blockage

AC ducts collect dust from your shoes, clothes, pets, dead skin and particles in the air like cigarette smoke. Collected dust can cut down the air flow significantly and this will result in moisture developing in your duct walls, which creates a perfect growing environment for mold.

For first timers who attempt an air conditioner repair, opening up the ducts can be a startling experience because the amount of accumulated dust is usually beyond their wildest imaginations.

Blocked duct not only affect the airflow but it also poses serious health problems. There is only one place for the accumulated dirt to settle: your lungs. AC ducts that are not cleaned for several years can damage your health and can result in developing serious breathing disorders. People with severe allergies should not attempt to clean their own duct work.

How Duct Cleaning Is Done

This DIY air conditioner repair task can be done with your home vacuum cleaner or by Brisbane air conditioning service, among others. Make sure that you open all the windows and doors in your home prior to cleaning the AC ducts. If you notice mold build up on the walls, it is recommended to use an antifungal cleaning solution that not only eliminates mold growth but can prevent future growths.

If the AC ducts are really long and your home vacuum cleaner can’t reach all the nook and corner, a DIY air conditioner repair may not be a good idea. You will need an HVAC industry specific AC duct cleaner to remove debris from your ducts.

The same goes for AC ducts that are made with materials such as fiberglass. Specialty tools are needed to clean duct work that are made with unique materials.

If you find out that your air conditioner ducts can’t be cleaned with your vacuum, consider hiring some repair service company like the air duct cleaning in Kansas City  to get the job done.

The most common problems requiring air conditioner repair

There are many possible things that can go wrong with an air conditioner, and most of them will require an air conditioner repair technician to service the unit, the wiring, or the thermostat.

While there are many items that can potentially happen to an air conditioning unit, there are some problems that are a lot more common than others. Knowing these problems can make it simpler to prevent them, since many of the most common problems really stem from a handful of issues… some of them being preventable. However, this knowledge can also give you an advantage when trying to communicate the problem to your certified air conditioner repair technician; HVAC repair personnel can often diagnose a problem right over the phone if you can give them enough information.

  1. Faulty wiring is often causes hugs problems. This can be prevented by having your wiring inspected each year by an air conditioner repair company. If your unit does not seem to be putting out cold air, you may be low on refrigerant; and this is usually a pretty simple fix.
  1. Another problem that air conditioner repair technicians run into is that the fans are not spinning. This means that air will not circulate. Air conditioner service is definitely in order if this is one of your problems.
  1. Sometimes, your air conditioner coil will freeze up, which can really play havoc with your system. An air conditioner repair tech will not only have to thaw out the coil, but will also have to find out what caused the problem in the first place. A dirty filter (especially if you have pets or other animals) can really contribute to this problem, so making sure that you have a clean filter installed can help to prevent this problem from occurring.