If you are new to air conditioning repair, compressor service switch is probably something that you are not very familiar with. The compressor service switch is located outdoors, usually near by the compressor unit.
It doesn’t necessarily have to be a switch always but a comparable service switch can also be a circuit breaker or fuse pullout. You should not attempt air conditioning repair without turning off this switch. The compressor service switch permits you to work on the compressor without the fear of electric shock and you can avoid cutting off the electric supply to the whole building.
What If You Can’t Find A Compressor Service Switch?
Although a necessary component for air conditioners, a compressor service switch is usually absent in old ACs. Nowadays, the law mandates the installation of these switches as they are necessary for your safety.
If your AC do not have this switch, you can work perform an air conditioning repair job by turning off the mains but it is recommended to get this switch installed for safety and convenience reasons.
If you are installing a compressor service switch on your own, it is important to have the necessary expertise to perform this job. Since this switch is fitted outdoors, make sure that they don’t get damaged due to weather conditions, debris or animals. It is important to properly mount them on the walls for easy operation and safety.
An improperly mounted compressor service switch can do more harm than good. For instance, loose screws can eventually fall off and in worse cases; they fall inside the switch, resulting in a short circuit.
DIY air conditioning repair on compressor is a cakewalk on air conditioner units that come with the service switch.