Tag Archives: swimming pool chemicals

Storing Swimming Pool Chemicals During the Winter

Pool chemicals cost money. It’s common to have swimming pool chemicals left over after the season. How should you store these chemicals so that they are usable in the spring? There are two things you need to consider. First, look at the shelf life of the products you want to store. Next, you’ll need to examine the best methods for storing those products.

Winterized backyard swimming poolYour worst enemies when it comes to using swimming pool chemicals are heat, light and moisture. You need to avoid these problems all year long to increase the life span of your products. Heat seems like the easiest problem to avoid, but if you store your chemicals in a sun porch or basement room that gets a lot of light, there is a chance they could overheat and break down. When this happens, the products become less effective quickly.

The chemicals shouldn’t be left directly on the floor and should be contained in waterproof containers. If the containers leak, cover them with waterproof materials so that the swimming pool chemicals don’t leak in dangerous areas. For safety’s sake, it’s important to store your swimming pool chemicals separately. Never store Muriatic acid and bleach-based chemicals close to one another. If you place them side by side, you could accidentally mix the chemicals together. Assume that a leak in the container is possible when estimating the distance between the chemicals for storage.

Check the expiration date on chemicals. You shouldn’t try to use products that are far beyond their expiration date as they will not be effective. Chlorine is a product that expires more quickly than some other products. If you find that you have a significant amount of chlorine left each year, order less chlorine during the summer so that you can save yourself money.

Don’t buy chemicals from big box stores. Instead, turn to swimming pool specialty stores. They rotate products more quickly while products tend to sit on shelves at big box stores for a long time. This will put you ahead as you’re buying fresher products.

When it comes to storing swimming pool chemicals in any season, it’s important to consider safety. If you have children or animals, you should keep the chemicals in a place they cannot access. Many people purchase lockable, weatherproof storage units that will protect everyone from accidents.

Testing Water: What to Look For

Why is it so important to test your water? You need to ensure the health and safety of your swimmers. Sanitizers keep the swimming pool clear of contaminants. Without the right chemical balance, algae can grow quickly. Improperly treated water can increase the risk of infections or illnesses. When swimming pool chemicals are out of the appropriate range, they can cause problems with your equipment including the pump, pipes, filter and heater. Imbalanced swimming pool water can cause corrosion and ultimately lead to expensive repairs.

Indoor big blue swimming pool interior in modern minimalism styleWhen you test water, you can use the information to determine which chemicals you need to add and in what amounts. You should always test the water before you add chemicals. When you add chemicals to the water, it may take up to 24 hours for the water to adjust. Keep this in mind before you retest.

Water testing methods come in a variety of styles. You can purchase testing kits that use vials of water to test for different chemicals. Testing strips have become popular in recent years. You can also purchase electronic testing kits but these tend to be quite a bit more expensive.

If you decide to test swimming pool water using testing strips, always buy new strips each year. The strips lose their effectiveness over time. Keep any type of testing kit out of the sun and protect it from water so that you can get accurate results. Always test the water about one foot to one and a half feet below the surface.

What should you look for? If your chlorine levels are high, it can affect the results of the total alkalinity and pH in the pool. Check the cyanuric acid levels. It protects the chlorine from the sun, but if the levels are too high, the chlorine will become completely ineffective at sanitizing the swimming pool.

The pH level of the pool is just as important as the chlorine level. You’ll often find that the pH level of the water is high and you’ll need to lower it using muriatic acid or granular acid. If the pH level is continuously high, check the alkalinity which is probably low. Once you adjust the alkalinity, your pH level should be in the appropriate range.

Products for Zeolite Filter Media

zeolite poolSince pools have been around, people have experimented with a variety of swimming pool chemicals to treat water. Pool filters have evolved along with swimming pool chemicals in the effort to keep pools clean with minimal effort. Sand, sand/anthracite and multimedia filters have been in use for years. Zeolite Filter Media has become more popular as researchers have discovered its highly effective filtering powers. Some tests show that Zeolite Filter Media are more effective than most other existing types of filters.

Even the best filters need care over time. When filters don’t work properly, the water will immediately begin to deteriorate. It can become dull, hazy and cloudy and generally unappealing. Swimming pool chemicals like water clarifiers can be a temporary fix for water problems, but the filter itself needs to be treated to keep water sparkling clean over the long term. It’s important to use the swimming pool chemicals that are appropriate for your filter so that you get the best possible results. The right chemicals will also protect your filter.

Bio-Dex’s Zero Filter Cleaner is especially designed to clean Zeolite Filter Media. It is one of the swimming pool chemicals that is best designed to maximize the efficiency of these types of filters. Pools don’t stay clean or run effectively when the filter is dirty. Zeolite Filters should be cleaned 30 days after you start up your pool to remove all the buildup acquired during the initial startup. If you use the product on a regular basis, you’ll find that your water stays cleaner and requires less maintenance for you.

Swimming pool chemicals for Zeolite Filter Media should perform a number of functions. The swimming pool chemicals should remove scale, mineral content and oil so that the filter functions properly. If your water has high mineral content, you should soak the filter in the cleaner for four to twelve hours. If the pool has unusually high mineral content, buildup or scale issues, soak the filter overnight. In these cases, you should also clean the filter more than once a year. Cleaning the filter every four to six weeks will prevent troublesome buildup.

When to Use Oil Digesters

Oil build up is a natural problem in swimming pools and spas. When people use the water, the oils from their skin are transferred into the water. This includes skin lotions, makeup, insect repellents, soaps and sunscreens. Over time, the oil builds up and becomes visible. You’ll be able to see oil floating on the surface of the pool. Spas show signs of oil buildup as well as pools. The water will begin to foam if there is too much oil in the water. There are swimming pool chemicals that can digest the oil in the water to eliminate the problem.

It’s especially important to treat oil with swimming pool chemicals after the water has had heavy usage such as after parties. Proper water balance will control minor oil issues. Your pool filter can also handle most minor amounts of oil but using the pool often requires proactive treatment with swimming pool chemicals.

pool oilIt’s natural for an area that is constantly wet and exposed to bathers to develop oil problems. If oil isn’t treated with swimming pool chemicals, it can result in several problems. The oil will build up on the filter and make the filter less effective. The oil can cause to scum build up along the pool’s water line. Oil can also build up on tile and require extensive cleaning if it isn’t treated right away.

Your filter will need to be cleaned occasionally even if you treat the water effectively with swimming pool chemicals. However, the better care you take of the water, the less need there will be for costly filter cleaning. Sand filters can go three to four years without cleanings if the water is properly maintained.

Oil Out Enzyme is a simple way to treat oil in your pool. You can pour the product into the pool while the filter is running. If the oil buildup is severe in particular areas, pour the product directly onto the oil. You may need to repeat the process after several days if the problem remains. Many pool owners find it helpful to add a maintenance dose to the pool on a weekly basis to prevent future buildup.

How to Eliminate Algae in Your Swimming Pool

Algae is one of the most problematic issues in owning a swimming pool. Pool owners struggle with it throughout the swim season, especially when they are first opening the pool. It’s also a problem when the weather changes rapidly. Fortunately, there are swimming pool chemicals that help pool owners manage even the worst algae problems.

eliminate pool algaeAlgae become extremely unattractive when it begins to grow. It gives the pool water a greenish tint and leaves a film on pool stairs and the sides of the pool. Often, pool owners can manage algae by the appropriate use of regular swimming pool chemicals like chlorine. However, algae can get out of control if the pool is neglected. That’s when it’s important to use the appropriate swimming pool chemicals to treat the algae before it gets worse.

The first step in dealing with algae is to use a brush and thoroughly brush the sides of the pool and other surfaces, such as stairs, where it has built up. It’s a bad idea to vacuum the pool before using the appropriate swimming pool chemicals to treat the water. This will simply spread the algae instead of killing it. Instead, you should use a good algae treatment like Aqua Pure to kill the algae. This type of treatment can be used as a three-month treatment which kills the original algae problem and prevents algae from returning as long as the appropriate chlorine levels are maintained in the pool.

Users should apply the algae treatment all around the edges of the pool. They should then mix the swimming pool chemicals in the water so that the algae treatment thoroughly mixes with the water. The appropriate dosages of algae treatment depends on the size of the pool and the degree of the algae problem. The next step is to add chlorine in the appropriate amount for the pool. Next, the user should run the pool filter for one to two days.

Often, bad algae problems require a second application of algae-killing swimming pool chemicals. This application should be followed by additional chlorine. Then, run the filter again and check the results. The dead algae should float to the bottom of the pool and can then be vacuumed.

Why it’s Important to Keep Your Pool Balanced

ph balanced waterIf you own a pool, you’ve probably read about the importance of keeping the swimming pool chemicals in your pool balanced. Why is this so critical? There are a number of reasons. The proper attention to your pool will make it more healthy and enjoyable due to a number of factors.

An unbalanced pool has a number of disadvantages. First, the pool water won’t be clear and sparkling. This makes the pool much less inviting to swimmers. Routine pool maintenance will keep your pool attractive and will cost you less money in the long run. It is easier to regularly treat your pool with the appropriate swimming pool chemicals than to neglect it and try to repair it. Fixing cloudy or algae-ridden water can be challenging. You will need to use more swimming pool chemicals than usual to get the water back into good shape.

Keeping your pool balanced is more cost effective than trying to play catch up when the water gets out of balance. You will need to buy large quantities of swimming pool chemicals to kill algae and bacteria. You’ll need to buy lots of products you would not need if you kept your pool balanced on a regular basis. Although there are some costs involved in maintaining a pool, they are nothing compared to the costs involved in trying to repair problems.

Keeping your pool balanced is important in terms of protecting your pool equipment. Water that isn’t treated with the appropriate swimming pool chemicals can damage your equipment. Unbalanced water can damage your filtering equipment and corrode the pipes in your pool. It can also compromise the lining of the pool. You may need to purchase new equipment if you don’t take good care of your pool.

Have you ever been in a pool that made your eyes red and your skin itchy? This happens when the swimming pool chemicals aren’t properly balanced. Swimmers will be much more comfortable in your pool if you keep the chemicals were they need to be; the water won’t sting or their skin will be less itchy. Properly balanced swimming pool water will also deter the growth of algae, which can make your pool surface slippery.

Closing Your Pool for the Winter

winterizing poolIf you close your pool properly at the end of the summer, it will make opening your pool in the spring much easier. It will also reduce the number of swimming pool chemicals you’ll need to get your pool up and running next year. There are some important steps you should take to close your pool properly so it will be safe throughout the winter. You should take these steps to prepare for closing down the pumps, heaters and other equipment you use to run your pool.

You should ensure that your pool water is properly balanced before you begin the closing process. Check the pH, calcium hardness and alkalinity of the water. If it is out of balance, add the proper swimming pool chemicals and wait four to five days before you close the pool. The pool chemicals will protect your pool over the winter by preventing scale build-up and corrosion.

One of the most important swimming pool chemicals you will need is an algaecide. In many cases, this will eliminate the existing algae in your pool and prevent more from growing over time. Killing algae is one of the biggest challenges in opening a pool for the spring. If you use an extra-strength algaecide when you close the pool, you will prevent algae growth over a long period of time.

Chlorine is one of the most important swimming pool chemicals in the pool closing process. You should use a chlorine shock to kill the bacteria living in the pool water. You should use a stronger shock product than the one you use during the swimming season. The shock should be strong enough that swimmers can’t get in it right away. A strong shock like this will kill all of the existing bacteria so that it will not grow while your pool is closed.

There are several other things you need to do after you balance the swimming pool chemicals. You should remove all the toys, ladders, hoses, pumps, decorations and any other items from the pool. Next, you should skim the pool to get rid of leaves, bugs and other debris that has accumulated on the water. This will help to keep the swimming pool chemicals at the appropriate balance during the winter. You should also vacuum the pool so that it is thoroughly clean.