Why is it so important to test your water? You need to ensure the health and safety of your swimmers. Sanitizers keep the swimming pool clear of contaminants. Without the right chemical balance, algae can grow quickly. Improperly treated water can increase the risk of infections or illnesses. When swimming pool chemicals are out of the appropriate range, they can cause problems with your equipment including the pump, pipes, filter and heater. Imbalanced swimming pool water can cause corrosion and ultimately lead to expensive repairs.
When you test water, you can use the information to determine which chemicals you need to add and in what amounts. You should always test the water before you add chemicals. When you add chemicals to the water, it may take up to 24 hours for the water to adjust. Keep this in mind before you retest.
Water testing methods come in a variety of styles. You can purchase testing kits that use vials of water to test for different chemicals. Testing strips have become popular in recent years. You can also purchase electronic testing kits but these tend to be quite a bit more expensive.
If you decide to test swimming pool water using testing strips, always buy new strips each year. The strips lose their effectiveness over time. Keep any type of testing kit out of the sun and protect it from water so that you can get accurate results. Always test the water about one foot to one and a half feet below the surface.
What should you look for? If your chlorine levels are high, it can affect the results of the total alkalinity and pH in the pool. Check the cyanuric acid levels. It protects the chlorine from the sun, but if the levels are too high, the chlorine will become completely ineffective at sanitizing the swimming pool.
The pH level of the pool is just as important as the chlorine level. You’ll often find that the pH level of the water is high and you’ll need to lower it using muriatic acid or granular acid. If the pH level is continuously high, check the alkalinity which is probably low. Once you adjust the alkalinity, your pH level should be in the appropriate range.
Hard water is a common and bothersome issue that affects the majority of households in the United States. Hard water can lead to many costly issues when left untreated. Adding drinking water filter systems to your home is one great way to tackle this problem head on, but even the best drinking water filter systems will not work unless they are properly maintained. Enlisting the help of a professional is always a good idea if you are not an expert in the water treatment field. Here are just a few of the reasons why you should consider having a professional maintain your system.
One of the best parts of having a professional assist you is the years of expertise they will bring with them. This allows them to detect small issues that may go unnoticed to a novice in the water treatment industry. Catching issues early with your drinking water filter system is crucial and can save you money in future repairs.
Additional Water Testing and Treatment
While you already have an expert at your house, why not have them take a look of all the components of your water treatment system? By doing this, they will be able to analyze your water and ensure that you are using the perfect setup for your conditions. This can save you time, money, and a headache! A reverse osmosis system can be complex; why take a chance?
Let’s face it, water is a must. Just think about how many times you use water in some capacity throughout the day. If you are not a mechanic; would you overhaul the engine of your work car? Probably not, the same holds true for your water system. Most companies will offer you a guarantee on their services. Why not take advantage of that offer? Doing so will allow you to sit back and relax, knowing you won’t have any unforeseen issues with your water system.
Ultimately, the decision of how to maintain your drinking water system or to have a professional do it will depend upon how comfortable you are with the intricacies of your water system. If you are uncertain of what to do, hiring a professional is always safer.
Hard water damages everything it touches, including your hot water heater. Water purification water treatment that includes water softening equipment will protect the inside tank from the corrosive sediment that eats away at hot water heaters. Settling of the sediment on the bottom of the tank as well as the build-up and scaling on the heating unit itself can cause it to overheat and stop functioning altogether.
Two essential water treatment techniques to maintain the optimum functionality of hot water heaters:
- Eliminate hard water at the water’s point-of-entry into the house. It is important that your hard water treatment effectively dissolves minerals like calcium, magnesium, iron, and manganese which are what make the water hard. These minerals produce corrosive sediment that can wreck havoc on the functionality of water heaters. Scaling seriously affects the day-to-day performance of your water heater. Eliminate hard water with a whole home water treatment system that includes a water softener.
- Drain hot water heaters annually. Start by turning off all power. Attach a hose to the drain valve at the bottom of the tank. You will drain out old stagnant sediment as well as water. By releasing the air valve at the top of the water heater the water will drain quicker. If the water tank is not cleaned regularly, the corrosive hard minerals will start eating away at the inside of the tank leading to permanent damage and leaking at the bottom of the tank.
Heavy minerals naturally sink to the bottom of the tank of traditional water heaters. Sediment can build up so thick that it encloses the entire heating element. This causes water heaters to use more energy to operate and sometimes even become non-functional.
By treating hard water and regularly draining and cleaning the unit, the life expectancy of hot water heaters increase exponentially. A home water treatment system designed to soften the household water will break down the corrosive hard minerals making it easier for the hot water heater to function properly.
Hard water is such a common household water problem that chances are high that water softeners should be included in your household water treatment expenses. Tell-tale signs of hard water include clothes with a gray tint, worn-out fabric, spots on glasses, shower doors that now permanently look dirty, hot water heaters making unusual noises, brittle hair and itchy, irritated skin.
Water softeners are most effective when utilized as point-of-entry water treatment. Then all water being transported throughout your house is softened before you use it to clean your dishes, your clothes, or yourself.
Hard water has a high concentration of dissolved minerals. The most common and destructive are calcium and magnesium. With excess calcium in the water, there will be hard water deposits on anything that the water touches. Near the opening on a humidifier, dry gritty residue is a symptom of hard water. It can be damaging to clothes and appliances when hard water is not softened with your water treatment solutions.
Water softeners break down the molecules of the hard water so that soap works with the water and creates the reaction that will get your clothes, dishes, and body the cleanest. If your home is not using systemic water softeners as part of the household water treatment system, your detergents are not working effectively and your clothes come out of the washing machine looking dull and gray.
Here is a quick test to see if you have hard water. In a closeable container add soap to water and shake it up. Is it now a cloudy gray liquid with limited suds? That’s a sign of hard water. With hard water you have to use more soap and therefore more water. If you live in an area with high water costs, then the longer you go without a home water treatment system the more ineffective your soaps will be and therefore the more water you will have to use. There are simple and effective water softeners available.
Did you know that the benefits of water treatment are beyond drinking fresh, tasty water? The bad taste of hard water is a concern for many households in the Arizona, especially when the water is used in coffee or tea because the hard water brings an unnatural taste ruining the overall experience. Some of us are embarrassed to offer coffee or tea to our guests because we know our coffee tastes funny; with a water treatment system, you can overcome this obstacle.
However, bad tasting water is not the only reason to consider a high quality water treatment system. Water treatment is also important to maintain good health; the minerals in hard water create soap foam, instead of lather so when you bath it is applied to your skin. You can’t wash the soap scum off easily with hard water, which blocks your skin pores, causing many people to develop itchy skin and brittle hair.
Another downside of homes with hard water is that sediment collects in water heaters, showerheads and pipes. Over time, water heaters may form a thick coating of minerals on the walls and this mineral layer reduces the heating capacity – ultimately raising your energy bills because the unit will have to work extra hard and longer to maintain a consistent temperature.
Those who have done household plumbing maintenance know how expensive it can be. Unfortunately, hard water can cause constant trouble and overtime as the plumbing in your home ages and degrades. A properly maintained soft water unit does not leave deposits in your pipe line, your showerheads will continue to work well after years of usage, and your glass doors will not be riddled with hard to clean water spots.
There are many benefits for water treatment ranging from maintenance costs to health. Best of all, you will have peace of mind throughout the day!